The injection molded product abrasive sponge is a green and safe high-density melamine foam. Its particle size is only one ten-thousandth of the size of a human hair. It can only be seen under a microscope. It looks like a three-dimensional network structure formed after being wet. The nano-capillary open-pore structure has super adsorption power. It can automatically absorb the stains on the surface of the object during the wiping process. It is like countless super micro vacuum cleaners at work. Due to the special decontamination mechanism of the injection molded abrasive sponge, it is suitable for many industries. The oily handprints that cannot be wiped off by the cleaning cloth, especially the stains on the uneven surface, have a special effect.

Injection molded products often have poor appearance due to oil stains, fingerprints, and small scratches. Usually, they can only be crushed and reheated, which increases the cost of the product. The polishing sponge for injection molded products has a good effect after being wiped and repaired, which can greatly increase the yield and reduce the repair rate, and save production costs. At present, major injection molding and plastic factories have begun to use it.

Which surface of the injection molded abrasive sponge to clean/repair the product

1. Keep a clean surface.

2. It does not contain corrosive chemicals.

3. Repair and polish the surface of small scratches, shadows and scratches.

Effectively solve the defects of plastic parts such as silver pattern, flow pattern, moisture and flower surface, and make the surface of the product bright.

Plastic surface treatment: remove fusion line (stripe, mark), flow pattern (mark), frost pattern, silver pattern, discoloration, dent, shrinkage pattern, bonding line (pattern) paste, ripple, mold mark, demoulding line , Strains, nozzle lines, swirling lines, water lines, wave marks, burrs, flashing, piercing, etc.

Metal surface treatment: including alloys. Wire drawing, oxide layer, oil stain, rust layer, etc.

Treatment of oil stains, handwriting and handwriting on the surface of leather products.

How to use: First use Xiamen Share nano injection molding abrasive sponge to clean/repair all the stains or blemishes, and then dry it with a non-corrosive, water-absorbent cleaning cloth. It is recommended to use cotton cloth or cloth with high cotton content, do not use styrolone or nylon cloth, these cloths will damage the surface of the object.

More details on www.xmsihang.com